CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutSign UpSign In
rapid7

Real-time collaboration for Jupyter Notebooks, Linux Terminals, LaTeX, VS Code, R IDE, and more,
all in one place. Commercial Alternative to JupyterHub.

GitHub Repository: rapid7/metasploit-framework
 Path: blob/master/documentation/modules/auxiliary/scanner/scada/pcomclient.md
Views: 16117

Vulnerable Application

Unitronics Vision PLCs using PCOM protocol

Verification Steps

  1. Do: use scanner/scada/pcomclient

  2. Do: set RHOST=IP where IP is the IP address of the target

  3. Do: run to send PCOM command

Scenarios

msf > use scanner/scada/pcomclient
msf auxiliary(scanner/scada/pcomclient) > show options

Module options (auxiliary/scanner/scada/pcomclient):

Name     Current Setting  Required  Description
----     ---------------  --------  -----------
ADDRESS  0                yes       PCOM memory address (0 - 65535)
LENGTH   3                yes       Number of values to read (1 - 255) (read only)
OPERAND  MI               yes       Operand type (Accepted: Input, Output, SB, MB, MI, SI, ML, SL)
RHOST                     yes       The target address
RPORT    20256            yes       The target port (TCP)
UNITID   0                no        Unit ID (0 - 127)
VALUES                    no        Values to write (0 - 65535 each) (comma separated) (write only)


Auxiliary action:

Name  Description
----  -----------
READ  Read values from PLC memory


msf auxiliary(scanner/scada/pcomclient) > set RHOST 192.168.1.1
RHOST => 192.168.1.1
msf auxiliary(scanner/scada/pcomclient) > run

[*] 192.168.1.1:20256 - Reading 03 values (MI) starting from 0000 address
[+] 192.168.1.1:20256 - [00000] : 0
[+] 192.168.1.1:20256 - [00001] : 1
[+] 192.168.1.1:20256 - [00002] : 0
[*] Auxiliary module execution completed
msf auxiliary(scanner/scada/pcomclient) >